FACP Addressable, Stand-Alone VS4 Panel

The KIDDE VS4 intelligent life safety system from Edwards® offers the speed of high-end intelligent processing in a configuration that delivers an uncomplicated solution for small to mid-sized applications. With intelligent detection, electronic addressing, automatic device mapping, optional Ethernet® connectivity, and a full line of easily-configured option cards and modules, this quick-to-install system offers versatility that benefits property owners and contractors alike.

The attractive appearance of V-Series control panels means they won't be a blemish on an expensive architectural design.  Their gentle curved doorfronts offer a distinctive flair.  Controls are discreetly inset behind a striking black bezel.


  • Supports V-Series analog addressable modules and detectors
  • Form C contacts for Alarm and Trouble, Form A for Supervisory
  • Electronic addressing with automatic device mapping
  • Optional Ethernet port for central station reporting diagnostics, programming and a variety of reports
  • Two programmable switches with LEDs and custom labeling
  • Supports Genesis horn silence over two wires and UL 1971-compliant strobe synchronization
  • Built-in Coder: 4-digit coded output, which is played on horns in response to alarm conditions (00-00-00-00 to 99-99-99-99)
  • Supports up to eight serial annunciators, (LCD, LED-only, and graphic interface)
  • Can use existing wiring for most retrofit applications
  • 4 x 20 character backlit LCD display
  • Upload/download remotely or locally via Ethernet port or phone lines
  • Two-level maintenance alert reporting
  • Pre-alarm and alarm verification by point
  • The panel can charge up to 26 Ah batteries
  • Two (2) Class-B remote annunciator circuits or one (1) Class-A
  • Can control up to eight (8) remote annunciators
  • Programmabe sounder/relay bases
  • Latching Outputs
  • Display language can be selected as English or French
  • Available Finishes: Red or Gray door (check with your local authority for use of Gray)
  • Comes with two (2) CAT-45 keys
  • Primary AC power 120VAC @ 60Hz and 230VAC @ 50-60Hz
  • Agency Listings: UL, ULC, CSFM, FM, COA#6202
  • UL864 Listed for releasing application using GSA-REL.  Link to UL Listing for releasing panel.
  • Optional earthquake hardening: seismic Importance Factor 1.5
  • Comes with 15KΩ 1/4W end-of-line resistors for NAC circuits and battery leads.
  • Aux Power 1 (Continuous circuit) - 24VDC @ 500 mA
  • Aux Power 2 (Resetable circuit - programmable for continuous) - 24VDC @ 500 mA  with 1 Amp possible if you reduce total available NAC power by 500 mA

Standard Features

  • Comes standard with one Class A or Class B analog device loop (expandable to two by ordering the V-SLC-1/2 board)
  • Supports up to 250 (expandable to 1,000) intelligent devices: each loop supports up to 125 detectors and up to 125 modules
  • Can hold up to two 18 Ah batteries inside cabinet
  • If larger batteries are required use Battery Cabinet BC-1 or BC-2
  • Four Class B NACs or two Class A NACs
  • NAC current is 6 A max. (2.5 A max per circuit)
  • Weight: 25 Lbs
  • AC Current Draw: 2.0 A @ 120VAC, 60 Hz or 230 V, 50/60 Hz, 0.97 A 
  • Dimensions: H28.00" x W15.75" x D3.85"
Note: You must order the V-SLC-1/2 loop driver board to add addiional loops.

Note: To upload/download the program and if a printer is connected to the panel you must order the RS-232 serial board 

Note: Replace batteries at least every 3 years.  Batteries should be tested for proper operation during regular maintenance services.  Defective batteries may lead to loss of system operation during power failure.


FACP Addressable, Stand-Alone VS4 Panel
Click To Enlarge
  • Item #: VS4
  * Marked fields are required.
Price $1,225.00

Related Items