Module - Pattern Generator (GSA-T3T4)

The Signature Series Pattern Generator Module is an analog addressable device used to connect to the sounder base model AB4GT to generate a Temporal-3 or Temporal-4 coded signal input to the base

The loop controller assigns an address to the module automatically. A custom address can also be assigned to the module via laptop computer. No addressing switches are used. Diagnostic LEDs provide visible indication of the status of the module when the cover plate is removed:

• Normal: green LED flashes
• Alarm/active: red LED flashes


  • Operating voltage range: 15.2 to 19.95 Vdc
  • Standby current: 300 μA
  • Activated current: 450 μA
  • Ground fault impedance: 10 kΩ
  • Temperature: 32 to 120 °F (0 to 49 °C)
  • Humidity: 0 to 93% RH, noncondensing at 90 °F (32 °C)
  • Storage temperature range: -4 to 140 °F (-20 to 60 °C)
  • EOL resistor value at input: 15 KΩ
  • Output rated at: 3.5 Amps
  • Max. circuit resistance (per channel): 50 Ω (25 Ω per wire)
  • Max. circuit capacitance (per channel): 0.1 μF
  • Agency Listings: UL, ULC, FM, CSFM, MEA

NOTE: Requires constant 24Vdc at the input.


Module - Pattern Generator (GSA-T3T4)
Click To Enlarge
  • Item #: GSA-T3T4
  * Marked fields are required.
Price $118.00

Related Items