FACP Addressable, Stand-Alone (E-FSA64 & E-FSA250 Panel)

The E-FSA64 & E-FSA250 life safety system offers the reliability of analog/addressable fire detection for small to mid-sized applications. Built to provide years of trouble-free service, this system benefits building owners and installers with rotory device addressing, optional Ethernet® connectivity, and a full line of easily-to-configure option cards and modules. 

The E-FSA250 provides one Class A or Class B analog/addressable device loop that supports up to 127 devices. A second 127-point loop may be added to the E-FSA250 to expand total system capacity to up to 254 device addresses. The panel includes four NACs that may be wired for either Class A or Class B operation. 

Features in Common

  • Supports E-FSA Series analog addressable modules and detectors
  • Form C contacts for Alarm and Trouble, Form A for Supervisory
  • Rotary switch addressing
  • Optional Ethernet port for central station reporting diagnostics, programming and a variety of reports
  • Two programmable switches with LEDs and custom labeling
  • Supports Genesis horn silence over two wires and UL 1971-compliant strobe synchronization
  • Supports up to eight serial annunciators, (LCD, LED-only, and graphic interface)
  • Can use existing wiring for most retrofit applications
  • 4 x 20 character backlit LCD display
  • Upload/download remotely or locally via Ethernet port or phone lines
  • Two-level maintenance alert reporting
  • Pre-alarm and alarm verification by point
  • The E-FSA64 and E-FSA250 panels can charge up to 26 Ah batteries
  • Two (2) Class-B remote annunciator circuits or one (1) Class-A
  • Can control up to eight (8) remote annunciators
  • Programmabe sounder/relay bases
  • Latching Outputs
  • Display language can be selected as English or French
  • Available Finishes: Red or Gray door (check with your local authority for use of Gray)
  • Comes with two (2) CAT-45 keys
  • Primary AC power 120VAC @ 60Hz and 230VAC @ 50-60Hz
  • Agency Listings: UL, ULC, CSFM, FM, MEA
  • Comes with 15KΩ 1/4W end-of-line resistors for NAC circuits and battery leads.

E-FAS64 Standard Features

  • Comes standard with one Class A or Class B analog device loop (not expandable)
  • Supports up to 64 intelligent devices of any type
  • Can hold up to two 9 Ah batteries inside cabinet
  • If larger batteries are required use Battery Cabinet BC-1 or BC-2
  • Two Class B NACs (optional Class A wiring is available with the use of a SA-CLA Class A Module)
  • NAC current is 3.75 max. (2.5 A max per circuit)
  • Weight: 20 Lbs
  • Dimensions: (LxWxD) 21.7"x14.25"x3.85"

E-FAS250 Standard Features

  • Comes standard with one Class A or Class B analog device loop (expandable to two by ordering the XAL127 card)
  • Supports up to 127 (expandable to 254) intelligent devices: each E-FSA250 loop supports up to 127 detectors or modules in any combination
  • Can hold up to two 18 Ah batteries inside cabinet
  • If larger batteries are required use Battery Cabinet BC-1 or BC-2
  • Four Class B NACs or two Class A NACs
  • NAC current is 6 A max. (2.5 A max per circuit)
  • Weight: 25 Lbs
  • Dimensions: (LxWxD) 28.2"x15.75"x3.85"
Note: You must order the XAL127 loop driver board to add the second loop to the E-FSA250 panel.

Note: You must order the RS-232 serial board for either the E-FSA64 or E-FSA250 panel.  It is required to upload/download the program and if a printer is connected to the panel.

Note: Replace batteries at least every 3 years.  Batteries should be tested for proper operation during regular maintenance services.  Defective batteries may lead to loss of system operation during power failure.

Brochure:


Specification Sheets:

        

E-FSA64            E-FSA250 

Manuals:

Technical Reference Manual 

Instructional Videos:

 

FACP Addressable, Stand-Alone (E-FSA64 & E-FSA250 Panel)
Click To Enlarge
  • Item #: E-FSA
  * Marked fields are required.
Qty*
Price $874.00

Related Items