FACP Conventional (F-Series Panel)

The FireShield Plus fire alarm family consists of 3, 5 and 10 zone conventional fire alarm control panels, an integrated DACT/Dialer, serial annunciator modules, and serial remote relay modules.  All of these components are microprocessor-controlled. The FireShield Plus family is ideal for both new and retrofit installations alike.

FireShield Plus incorporates features designed to simplify installation, operation and maintenance. These include front panel programming, one person walk testing, and selectable IDC and NAC types. In addition, when used with CleanMe® -compatible smoke detectors, FireShield Plus provides analog type features such as remote maintenance alert and automatic drift compensation that reduces false alarms and simplifies maintenance calls.

FSP502 and FSP1004 panels support Class A operation by combining pairs of on-board Initiating Device Circuits (IDCs) or Notification Appliance Circuits (NACs) to provide the necessary Class A circuits. For example, the FSP1004 comes factory set to support 10 Class B IDCs and four NACs. But it can be field-configured to provide five Class A IDCs, no Class B IDCs, and two Class A NACs – or any other combination of circuits that fall within the circuit-pairing parameters.

Standard Features

  • Available in 3, 5, and 10 IDC models
  • 10-zone model includes 10 Class B IDC zones, 4 Class B NAC's, 3.5A NAC power
  • Expandable power supply on 10 IDC panel reduces booster power costs (requires F-XTR120 transformer) and increases NAC total output power to 7.0 Amps
  • IDC or NAC pairs convertible to single Class A circuits (10 and 5 IDC panels only)
  • CleanMe® provides remote annunciation if a detector drifts out of UL/ULC limits, reducing the chance of a false alarm
  • Combination Waterflow and Supervisory IDCs reduce wire and zone counts
  • NACs programmable by zone and individually selectable for Genesis, continuous, temporal outputs, or coded signal
  • Front panel programmable simplifies installation and servicing
  • Optional fully integrated Digital Alarm Communications Transmitter DACT/Dialer for PC programming
  • Genesis option allows precision synchronization and audible silence over two wires without additional modules
  • On-board relays for ALARM, SUPERVISORY and TROUBLE
  • Optional serial bus relay modules are programmable for common or zone activation
  • Optional serial bus remote annunciator family
  • One person walk-test (audible or silent)
  • Supports a wide variety of conventional detectors
  • FSP1004 can charge up to 24 Ah batteries.  Maximum size batteries that fit into cabinet is two 18 Ah batteries.
  • FSP502 and FSP302 can charge up to 24 Ah batteries.   Maximum size batteries that fit into cabinet is two 9 Ah batteries.
  • If larger batteries are required use Battery Cabinet BC-1 or BC-2
  • Front panel programming or PC with software
  • Agency Listings: UL, ULC, CSFM, MEA
  • Listed to UL864 9th edition standard
  • 3 & 5-zone panel measures 14.23"W x 19.5"H x 3.75"D
  • 10-zone panel measures 16.25"W x 30"H x 3.75"D
  • COA#6200

Note: When ordering with DACT option a plug-to-plug cord comes included.  Provide standard RJ31X telephone jacks separately.

Note: Replace batteries at least every 3 years.  Batteries should be tested for proper operation during regular maintenance services.  Defective batteries may lead to loss of system operation during power failure.

Contact Us about our international power solution!



FACP Conventional (F-Series Panel)
Click To Enlarge
  • Item #: FSP
  * Marked fields are required.
Price $422.00

Related Items