Horn/Strobe, Ceiling-Mount (Genesis)

The Genesis™ line of signals are among the smallest, most compact audible-visible emergency signaling devices in the world. About the size of a deck of playing cards, these devices are designed to blend with any decor.

Thanks to patented breakthrough technology, the Genesis™ strobes do not require bulky specular reflectors and lenses. Instead, an exclusive cavity design conditions light to produce a highly controlled distribution pattern. Significant development efforts employing this new technology have given rise to a new benchmark in strobe performance – FullLight technology.

FullLight strobe technology produces a smooth light distribution pattern without the spikes and voids characteristic of specular reflectors. This ensures the entire coverage area receives consistent illumination from the strobe flash. As a result, Genesis strobes with FullLight technology go well beyond the minimum UL-required “T” pattern, significantly exceeding UL-1971 and ULC-S526 light distribution requirements.

Standard Features

  • Unique low-profile design
  • The most compact UL-1971/ULC-S526 listed ceiling strobe available
  • Ultra-slim – protrudes less than 1.6 inch from the ceiling
  • Architecturally attractive appearance
  • No visible mounting screws
  • Four field-configurable options in one device:
    • Standard candela model with switch selectable 15, 30, 75, or 95 cd strobe output
    • High candela model with switch selectable 95, 115, 150 or 177 cd strobe output
    • Jumper select high (default) or low dB horn output (cut jumper)
    • Jumper select three-pulse temporal (default) or steady horn output (cut jumper)
    • Jumper select public mode flash rate (default) or private mode (cut jumper)
    • Temporal tone synchronizable with strobe flash (requires Signal Master Module MG1M or MG1M-RM)
    • Selectable features allow for less or no stocking of a multitudes of variations
  • Easy to Install
    • Fits standard 1-gang electrical boxes
    • Pre-assembled with captive hardware
    • #12 AWG terminals – ideal for long runs or existing wiring
  • Unparalleled performance
  • Industry’s most even light distribution
  • Meets tough synchronizing standards for strobes
  • Single microprocessor controls both horn and strobe
  • Low current draw minimizes system overhead
  • Power horn or chime and strobe over a single pair of wires and independently control the coded tone that will sound over the horn zone.  Select steady tone for configuring coded tone output (requires Signal Master Module MG1M or MG1M-RM when powered from non-coded NAC zone).  
  • Highly regulated in-rush current
  • Multiple frequency tone improves sound penetration
  • Industry’s first temporal strobe output
  • Agency Listings: UL, ULC, FCC, CE, CSFM, FM, MEA

NOTE: Requires 4" square electrical box for the installation. 

NOTE: When the device is powered from VS1 or VS2 Fire Alarm Control Panel or Booster Power Supplies models MIRBPS6A or MIRBPS10A the Signal Master Module is not required.

 

Horn/Strobe, Ceiling-Mount (Genesis)
Click To Enlarge
  • Item #: MGC
  * Marked fields are required.
Qty*
Price $58.00

Related Items