Strobe Light-Wall/Ceiling Mount, Indoor/Outdoor (Genesis Series)

4MS/CS405 Series Integrity strobes are specially designed for use with compatible life safety communication and control equipment to alert the hearing impaired of a life safety event. Strobes are available with 15cd, 15/75 cd and 110 cd effective flash intensity. They are fully compatible with Genesis Series signals.

4MS/CS405 Series strobes exceed UL synchronization requirements (within 10 milliseconds other over a two-hour period) when used with a separately-installed MG1M Signal Master, or GSA-CC1S Synchronization Module, or when powered by suitably enabled booster power supplies and control panels.

The flash from 4MS/CS405 Series strobes can be noticed from almost any position in the room, corridor, or large open space. 4MS/CS405 Series strobes are UL 1971 listed with both wall and ceiling cd intensity ratings (see Specifications). This is useful in areas where the Authority Having Jurisdiction (AHJ) permits ceiling-mount strobes.

4MS/CS405 Series strobes are designed for 16 to 33 Vdc operation and must be connected to signal circuits that output a constant (not pulsed) voltage. A diode is used to allow full signal circuit supervision and polarized connections are made to terminals that accept up to #12 AWG (2.5mm²) wire.

The strobe front plate is of steel constructionfinished with durable baked epoxy polyester powder-coat paint.

Standard Features

• UL/ULC Listed for outdoor use when installed with weatherproof surface box
• UL 1971-listed synchronizing strobe
• Integrity strobes synchronize to the latest UL 1971 requirements when used with a synchronization source
• Genesis-compatible
• All Genesis Series and Integrity Series strobes on the same circuit meet UL 1971 synchronization requirements when used with an external control module.
• Approved for public and private mode applications
• UL 1971-listed as signaling devices for the hearing impaired and UL 1638-listed as protective visual signaling appliances
• Rugged red or white steel front plate
• Rated for wall or ceiling installation
• Field changeable field markings
• Lens language or standard “FIRE” marking is easily changed with optional LKW and LKC series lens kits.
• Fits 4-inch square flush box
• Ideal for retrofit and renovation projects
• Agency Listings: ADA, UL, ULC, FCC, CE, CSFM, FM, MEA

Note: Use the weather-proof 4" backbox.